Avaya 106760804 manual Document No -300090, Issue 28-3

	Rapid Spanning Tree Protocol
set port point-to-point admin status
Command Mode	Global Configuration.
Description	Specifies whether a port is connected to a shared LAN segment or a point-
	to-point LAN segment. A point-to-point LAN segment is connected to
	exactly one other bridge (normally with a direct cable between them). Only
	point-to-point links and edge ports can rapidly transition to forwarding
	state.
	If you set this field to Auto, the switch automatically detects whether the
	port is connected to a shared link or a point-to-point link. Ports operating in
	half duplex are set to non-point-to-point, and ports operating in full duplex
	are set to point-to-point. You can, however, manually set the type of link.
Syntax	set port point-to-point admin status {<mod-num> <mod-swport-range>}
	[...,{<mod-num> <mod-swport-range>}] {force-true force-false auto}

Table 28-2. Parameters, Keywords, Arguments

Name

Definition

<mod-swport-	The module and port or port range.
range>
force-true	Defines the port as connected to a point-to-point link.
force-false	Defines the port as connected to a shared LAN segment.
auto	Automatically detects whether the port is connected to a
	shared link or a point-to-point link. Ports operating in half
	duplex are set to non-point-to-point, and ports operating
	in full duplex are set to point-to-point
	If you select this setting, the OperPointToPoint field of
	the show port command displays the link type that is
	detected.

Systems P580 and P882.

Document No. 10-300090, Issue 1 28-3