Avaya 106760804 manual Show intelligent-multicast static-client, Parameters, Keywords, Arguments

Intelligent Multicast

show intelligent-multicast static-client

Command Mode	User.
Description	Displays all statically configured client ports for a given Intelligent
	Multicast session.
	* Note: If a static session is created with vlan all, then you must specify
		vlan all to see the clients. If a static session is created with an
		IP address, then you cannot use the MAC address to see the
		clients.
Syntax	show intelligent-multicast static-client {<group-address> mac-address
	<mac-address>} vlan {all <vlan-id> name <vlan-name>}
	Table 10-21. Parameters, Keywords, Arguments
	Name		Definition
	<group-address>		The IP address of the multicast group.
	<mac-address>		The MAC address associated with this entry:
	vlan		The choices are:
			•	all - The static session or client is created for all
				VLANS.
			•	vlan-id- A session or client is created for a specific
				VLAN only identified by numerical ID.
			•	name - A session or client is created for a specific
				VLAN only identified by VLAN name.
Sample Output	The following example displays the Intelligent Multicast client ports for the
	multicast session created with all VLANs.
	> show intelligent-multicast static-client 225.1.1.2 vlan all
	IM	ClientPort		Application
	----	-----------		-------------------
	1	3.2		Mgmt : 225.1.1.2
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 10-37