Avaya 106760804 manual Set diffserv plp, Dscp-start-range, Dscp-end-range

80-Series QoS

set diffserv plp

	* Important: This command is for future functionality and is not
	currently supported.
Command Mode	Global Configuration.
Description	Assigns a packet loss probability (PLP) to a DiffServ code point (DSCP).
Syntax	set diffserv plp {low high} dscp <dscp-start-range>[<dscp-end-range>]

Table 23-7. Parameters, Keywords, Arguments
Name	Definition
{low high}	The PLP that you want to assign.
<dscp-start-range>	The first DSCP in the range of DSCPs that
	you want to assign the PLP to. DSCPs range
	from 0 to 63.
[<dscp-end-range>]	The last DSCP in the range of DSCPs that you
	want to assign the PLP to. DSCPs range from
	0 to 63.

* Note: While the PLP for a DSCP can be configured and displayed, the

		PLP is applied only when RED is enabled on a port.
Systems	■	P550R and P880, 80-series modules only.
	■	P580 and P882.

Document No. 10-300090, Issue 1 23-15