Document No. 10-300090, Issue 1 28-17
Rapid Spanning Tree Protocol
set spantree hold-count
Command Mode Global Configuration.
Description Sets the hold count for a bridge.
The hold count is the maximum number of BPDUs that are sent out a por t in
a hello time interval. During any one hello tim e interval, no more BPDUs
than the number that you enter for <hold-count-value> will be sent out a
port.
Syntax set spantree hold-count <hold-count-value> {802.1D | vlan {<vlan-id> |
name <vlan-name>}}
Systems P580 and P882.
Table 28-11. Parameters, Keywords, Arguments
Name Definition
<hold-count-value> The maximum number of BPDUs that are sent out a port in
a hello time interval. During any one hello time interval, no
more BPDUs than the number that you enter in this field
will be sent out a port.
The valid range for this field is 1 to 10 seconds. The default
setting is 3 seconds.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE 802.1D
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1.
<vlan-id> The VLAN ID of the bridge.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning Tree.
For a detailed description of per-VLAN and dual-layer
Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1
<vlan-name> The VLAN name of the bridge.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN and
dual-layer Spanning Tree, see Chapter 7, “Configuring
Rapid Spanning Tree,” in User Guide for the Avaya P580
and P882 Multiservice Switches, Software Version 6.1