Avaya 106760804 manual Set spantree fwddelay

Chapter 28

set spantree fwddelay

Command Mode	Global Configuration.
Description	Sets the Spanning Tree forward delay time for a bridge. The forward delay
	time is the time a port takes to change to the forwarding state. The default
	time is 15 seconds.
Syntax	set spantree fwddelay <fwddelay-value>{802.1D vlan {<vlan-id> name
	<vlan-name>}}

Table 28-9. Parameters, Keywords, Arguments

Name	Definition
<fwddelay-value>	The forward delay value for the bridge, in seconds.
	The range is 4-30 seconds. The default setting is 15
	seconds.
802.1D	Use this keyword if the switch is running IEEE
	802.1D Spanning Tree. For a detailed description of
	IEEE 802.1D Spanning Tree, see Chapter 7,
	“Configuring Rapid Spanning Tree,” in User Guide
	for the Avaya P580 and P882 Multiservice Switches,
	Software Version 6.1.
<vlan-id>	The VLAN ID of the bridge.
	Use the vlan <vlan-id>keyword and variable when
	the switch is running per-VLAN or dual-layer
	Spanning Tree. For a detailed description of per-
	VLAN and dual-layer Spanning Tree, see Chapter 7,
	“Configuring Rapid Spanning Tree,” in User Guide
	for the Avaya P580 and P882 Multiservice Switches,
	Software Version 6.1
<vlan-name>	The VLAN name of the bridge.
	Use the vlan name <vlan-name>keyword and
	variable when the switch is running per-VLAN or
	dual-layer Spanning Tree. For a detailed description of
	per-VLAN and dual-layer Spanning Tree, see Chapter
	7, “Configuring Rapid Spanning Tree,” in User Guide
	for the Avaya P580 and P882 Multiservice Switches,
	Software Version 6.1

28-14 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1