Avaya 106760804 manual Logging protocol event, To Enable

Chapter 16

logging protocol event

Command Mode	Global Configuration.
Description	Sets the categories of the protocol events that generate notifications. If you
	enable event notification for CLI, SNMP, RIP, OSPF, DVMRP, LDAP,
	Apple Talk, or VRRP, you must set which categories of the protocol events
	generate notifications.
	* Important: If enabled, protocol event logging displays system
		messages that help Avaya Technical Support troubleshoot
		network problems. Avaya recommends that logging of
		protocol events be enabled only during troubleshooting
		sessions. If protocol event logging is enabled during
		normal network operation, the switch may display
		messages that users may incorrectly interpret as
		indications of protocol failures.
	* Note: Enabling logging of protocol events may cause the event log to
	rapidly fill with protocol events.
	The no command disables event notification for the specified category of
	protocol events. The default setting is that all protocol events are disabled.
Syntax
	To Enable:		logging protocol event {rip ospf dvmrp ldap cli snmp
			appletalk vrrp} {fault error warning info trace
			debug}
	To Disable:		no logging protocol event {rip ospf dvmrp ldap cli
			snmp appletalk vrrp} {fault error warning info trace
			debug}

16-10 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1