OSPF

 

ip ospf router-id

Command Mode

Global Configuration.

Description

Sets the router-id for the system. Use the no command to restore the default

 

setting (the lowest IP address configured on the system).

 

* Note: OSPF must be disabled for this command to take effect. If

OSPF is enable on the system the change will not take effect until OSPF is stopped and started again.

Syntax

To Configure: ip ospf router-id <router-id>

To Restore Default: [no] ip ospf router-id

 

Table 19-17. Parameters, Keywords, Arguments

 

 

 

 

Name

Definition

 

 

 

 

router-id

IP address that represents the router-id for the system.

 

 

 

Sample Output

The following command sets the router id for interface 123 to 10.0.8.123.

 

(config-if:123)#ip ospf router-id 10.0.7.123

Systems

P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1

19-25

Page 401
Image 401
Avaya 106760804 manual Ip ospf router-id, Following command sets the router id for interface 123 to