Avaya 106760804 manual Ip ospf dead-interval, Parameters, Keywords, Arguments

Chapter 19

ip ospf dead-interval

Command Mode	Interface Configuration.
Description	Sets the dead interval time for neighbors to declare this router down. Dead
	interval is the time that hello packets are not seen. This value must be the
	same for all routers attached to a common network. The value range is 1-
	65535 seconds. The default setting is 40 seconds.
	To return to the default time, use the no form of this command.

Syntax

To Configure:	ip ospf dead-interval <seconds>
To Restore Default:	[no] ip ospf dead-interval

	Table 19-11. Parameters, Keywords, Arguments
	Name	Definition
	<seconds>	Time in seconds of how long hello packets must be unseen
		before the neighbor declares the router down. This value must be
		the same for all routers attached to a common network.
		The value range is 1-65535 seconds. The default setting is 40
		seconds.
Sample Output	The following command sets the dead interval time to 60 seconds.
	(config-if:intf3)#ip ospf dead-interval 60
Systems	P550R, P580, P880, and P882.

19-16 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1