Avaya 106760804 manual Set port queue service cbwfq, Parameters, Keywords, Arguments

Chapter 23

set port queue service cbwfq

Command Mode	Global Configuration.
Description	Sets a port, port range, or module to use class-based weighted fair queuing
	(CBWFQ) queue servicing.
Syntax	set port queue service {{<mod-num> <mod-swport-range>}[..., {<mod-
	num> <mod-swport-range>}] all-ports} cbwfq queue <queue> bit-rate
	<rate> normal-burst <normal-burst>[exceed {drop max-burst <max-
	burst> [weight <weight>]}]

Table 23-14. Parameters, Keywords, Arguments

Name	Definition
<mod-num>	The slot number of a module. If you specify <mod-num>, all ports
	on the module are set to use CBQ.
<mod-swport-	The slot number of a module, and, either a port number, or a range
range>	of port numbers having the format Px-Py. For example:
	•	To specify port 1 on the module in slot 3, enter 3/1.
	•	To specify ports 1 through 5 on the module in slot 3, enter 3/
		1-5.
	If you specify <mod-swport-range>, the port or range of ports that
	you specify is set use CBQ.
all-ports	All ports in the chassis. If you specify all-ports, all ports on all
	modules in the chassis are set to use CBQ.
<queue>	The queue number, which can range from 0 to 7.
<rate>	The maximum bits per second that you want to assign to the
	queue.
	If the switch is operating in Fabric mode 1, the rate can range from
	220 Kbps to 1.5 Gbps.
	If the switch is operating in Fabric mode 2, the rate can range from
	270 Kbps to 1.5 Gbps
	Entering a rate of 0 disables the queue.
		1 of 2

23-26 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1