Chapter 24

set radius authentication source-ip

Command Mode

Global Configuration.

Description

Sets the IP interface address the switch will use as the source IP address in

 

the Access Request messages. This value must be an IP interface address on

 

the switch. If set, and the IP interface becomes disabled, RADIUS will not

 

function because the switch will not be able to send or receive RADIUS

 

messages.

 

If left 0.0.0.0 (the default), the switch automatically selects a source IP

 

address from one of its active interfaces. If you use this setting, you must

 

add each of the switch IP addresses to the Client file on the RADIUS server

 

since you are not manually setting the source IP address.

Syntax

To Configure

set radius authentication source-ip <ip-addr>

 

 

To Clear

clear radius authentication source-ip

 

 

 

Table 24-6. Parameters, Keywords, Arguments

 

 

 

 

Name

Definition

 

 

 

 

<ip-addr>

IP address that is used as the source IP address for Access Request

 

 

messages.

 

 

 

Sample Output

The following command sets the source IP address to 192.168.1.1:

 

(configure)# set radius authentication source-ip 192.168.1.1

Systems

P550R, P580, P880, and P882.

24-8

Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Page 534
Image 534
Avaya 106760804 manual Set radius authentication source-ip, Following command sets the source IP address to