Avaya 106760804 manual Set port mirror Fabricmode2, Parameter Definition

Chapter 21

set port mirror Fabric_mode2

Command Mode	Global Configuration.
Description	Set up or remove a port mirror on a switch in Fabric mode 2.
Syntax
	To Configure:	set port mirror Fabric_mode2 source-port <mod-port-
		range> mirror-port<mod-port-spec> channel <channel>
		direction {tx rx both sa da} sampling {always disable
		periodic} [sa <MAC-address>] [da <MAC-address>]
		[max-packets-sec<max-packets-sec-value>]
	To Clear:	clear port mirror Fabric_mode2 channel <channel>

Table 21-23. Parameters, Keywords, Arguments

Parameter	Definition
<mod-port-	Either the single port or the range of ports that you want to
range>	mirror. See Table 21-24for the specific port ranges that you
	can mirror.
<mod-port-	The port to which you want to mirror traffic.
spec>	Both the source port and mirror port must either:
	• Be on the same vlan and have the same vlan binding
	or
	• Have vlan binding set to bind to all
	Note: Avaya recommends that you mirror traffic to a port of
	the same speed or faster than the source port.
<channel>	The mirror channel that you want to use. Four channels are
	available. Enter a number from 1 to 4.
{tx rx both sa	The direction of traffic that you want to mirror or the MAC
da}	address filter that you want to use. If you enter sa or da, the
	switch monitors both transmit and receive traffic.
	Note: You can mirror transmit traffic of only one source port
	to the mirror port. You cannot mirror transmit traffic
	of multiple source ports to one mirror port.
	1 of 2

21-26 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1