Avaya 106760804 manual Area nssa, Following command sets nssa on the indicated area

Chapter 19

area nssa

Command Mode	OSPF Router Configuration.
Description	Configure an area as a Not So Stubby Area (NSSA). To remove the NSSA
	distinction from the area, use the no form of this command.

Syntax

To Enable:	area <area-id> nssa
To Disable:	[no] area <area-id>nssa

	Table 19-4. Parameters, Keywords, Arguments
	Name	Definition
	<area-id>	A decimal value or IP address that identifies an OSPF area. Use no
		area <area-id>to remove an area from the software configuration.
Sample Output	The following command sets nssa on the indicated area.
	(configure router:ospf)# area 2.0.0.0 nssa
	The following command removes nssa from the indicated area.
	(configure router:ospf)# no area 2.0.0.0 nssa
Systems	P550R, P580, P880, and P882.

19-6 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1