Chapter 13

ipx sap-network-filter

Command Mode

Interface Configuration.

Description

Specifies which services (by network) are present in SAP packets sent and

 

received on the interface. The no form of this command removes the filter

 

from an interface.

Syntax

To

ipx sap-network-filter<precedence> <filter-network>

Configure:

<service-type>{outbound inbound both} {filter

 

allow} [<filter-hops>]

 

 

To Remove:

[no] ipx sap-network-filter <precedence>

 

 

Table 13-12. Parameters, Keywords, Arguments

Name

Definition

<precedence>

Indicates the precedence of this SAP name filter in relation to

 

other SAP name filters on this interface. Lower numbers

 

indicate a higher precedence. The range is 0-9999.

 

 

<filter-

The network of the service that this filter matches. The range

network>

is 0 - FFFFFFFF where, FFFFFFFF matches all networks.

 

 

<service-type>

The type of the IPX SAP service, in hexadecimal. The range

 

is 0 - FFFF where, FFFF matches all service types.

 

 

{outbound

The filter direction.

inbound both}

outbound - Apply filter to SAP packets sent out the

 

 

 

interface.

 

inbound - Apply filter to SAP packets received on the

 

 

interface.

 

both - Apply filter to SAP packets in both directions.

 

 

 

 

 

1 of 2

 

 

 

13-28

Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Page 294
Image 294
Avaya 106760804 manual Ipx sap-network-filter, Configure