Avaya 106760804 manual Timers basic, To Restore Default

	IP-RIP
timers basic
Command Mode	RIP Router Configuration.
Description	Adjusts RIP network timers. The no form of this command restores the
	default timers. The default for the update timer is 30 seconds, and the
	invalid time default is 120 seconds.

Syntax

To Configure:	timers basic <update> <invalid>
To Restore Default:	no timers basic

	Table 12-10. Parameters, Keywords, Arguments
	Name	Definition
	<update>	Rate, in seconds, updates are sent. This is the fundamental
		timing parameter of the routing protocol. The valid range is 10 to
		50 seconds. The default setting is 30 seconds.
	<invalid>	Interval of time, in seconds, after which a route is declared
		invalid. This value should be at least three times the value of
		update. The valid range is 1 to 65,535 seconds. The default
		setting is 120 seconds.
		A route becomes invalid when there is an absence of updates that
		refresh the route. The route then enters holddown. The route is
		marked inaccessible and advertised as unreachable. However,
		the route is still used for forwarding packets.
Sample Output	The following example sets the update value to 60 seconds.
	(configure router:rip)# timers basic 60 120
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 12-13