Chapter 21

set port auto-flush

Command Mode

Global Configuration.

Description

When auto-flush is enabled and the link to a port fails, all entries in the

 

address forwarding table that were learned for this port will be marked

 

invalid. The default value for auto-flush is disabled.

Syntax

To Enable:

set port auto-flush{<mod-num> <mod-swport-range>}

 

[...,{<mod-num> <mod-swport-range>}] enable

 

 

To Disable:

set port auto-flush{<mod-num> <mod-swport-range>}

 

[...,{<mod-num> <mod-swport-range>}] disable

 

 

 

Table 21-4. Parameters, Keywords, Arguments

 

 

 

 

Name

Definition

 

 

 

 

<module-number>

The module number on which you want to set auto-flush.

 

 

Auto-flush can be set at the module level or port level.

 

 

 

 

<mod-swport-

The port, or port range on which you want to enable auto-

 

range>

flush.

 

 

 

Sample Output

The following example enables auto-flush for port 2, on module 4.

 

(configure)# set port auto-flush 4/2 enable

 

Port auto-flush set successful: 4/2.

Systems

P550R, P580, P880, and P882.

21-6

Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1

Page 438
Image 438
Avaya 106760804 manual Set port auto-flush