Avaya 106760804 manual Show ipx interface, Enter the show ipx interface command, Intf-name

Chapter 13

show ipx interface

Command Mode	User.
Description	Displays the details of IPX interfaces configured on the switch.
Syntax	show ipx interface [<intf-name>]

	Table 13-19. Parameters, Keywords, Arguments
	Name	Definition
	<intf-name>	The name of the interface to show.
Sample Output	The following is an example of the of the output that displays after you
	enter the show ipx interface command.
	10005129 is up, and administratively up
	On vlan ipxServer, is up
	IPX address is 10005129.02:e0:3b:d4:48:03,
	encapsulation type Ethernet SNAP
	MTU is 1492 bytes
	Delay of this Novell network, in ticks, is 1
	IPX Type 20 propagation packet forwarding
	mode is set to Inbound
	IPX RIP is enabled on this interface
	IPX RIP periodic update packets have an
	interpacket gap of 55 msec
	IPX RIP updates are sent with up to 50
	networks per packet
	Sending of IPX RIP triggered updates is
	enables
	IPX RIP update interval is 60 seconds
	IPX RIP aging interval multiplier is 3
	.
	.
	.
Systems	P550R, P580, P880, and P882.

13-38 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1