Avaya 106760804 manual Set radius authentication switch-service-type- required, Required enabled

RADIUS

set radius authentication switch-service-type- required

Command Mode	Global Configuration.
Description	If you enable switch-service-type-required, the switch recognizes only
	Access Accept messages that have the correct group name included. This
	setting prevents the switch from incorrectly allowing access to users that
	may have a user account on the RADIUS server but should not be allowed
	access to the switch. If this setting is disabled, any user account that is not
	assigned to a group could log in to the switch.
Syntax
	To Enable:	set radius authentication switch-service-type-required
		enabled
	To Disable:	set radius authentication switch-service-type-required
		disabled
Sample Output	The following command enables the switch-service-type-required setting:
	(configure)# set radius authentication switch-service-type-
	required enabled
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 24-9