Avaya 106760804 manual Ipx rip-multiplier, To Configure

		IPX
ipx rip-multiplier
Command Mode	Interface Configuration.
Description	Sets the interval at which a network’s RIP entry ages out. The no form of
	this command restores the default. The default value is three times the RIP
	update interval.
Syntax
	To Configure:	ipx rip-multiplier<multiplier>
	To Restore Default:	[no] ipx rip-multiplier

	Table 13-7. Parameters, Keywords, Arguments
	Name	Definition
	<multiplier>	The multiplier used to calculate the interval at which RIP routing
		table entries age out. This can be any positive number.
		The value you specify is multiplied by the RIP update interval to
		determine the aging-out interval.
Sample Output	The following example sets the IPX RIP age-out interval on an interface
	labeled “boston” to 40.
	(config-if:boston)#ipx rip-multiplier 40
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 13-19