Avaya 106760804 manual Set console databits, Configure# set console databits

Console

set console databits

Command Mode	Global Configuration.
Description	Sets the console serial port’s databit width. The default value is 8.
	* Note: This command is not applicable when the console serial port is
		configured in PPP mode. The input will not be accepted or
		stored when the console serial port is configured in PPP mode.
		However, if the console serial port is configured as TTY mode
		and the databits width is configured, the console serial port can
		be changed to PPP mode and the databit width is saved until
		TTY mode is restored.
Syntax	set console databits {7 8}
	Table 5-2. Parameters, Keywords, Arguments
	Name		Definition
	{7 8}		This is a required parameter. The number indicates the number
			of bits used in the data stream.
Sample Output	This example sets the databit width for the console serial port to 7.
	(configure)# set console databits 7
Systems	P550R, P580, P880, and P882.

Document No. 10-300090, Issue 1 5-3