Avaya 106760804 manual Logging traps

	Logging
logging traps
Command Mode	Global Configuration.
Description	Sets the type of syslog messages that are sent to SNMP trap receivers. The
	no form of this command disables the type specified. The default setting is:
	{start system config temp resource fan power service_port
	auth_failure bridge_stat switch_fabric redundant_cpu unknown_mac
	snmp}.

Syntax

To Enable:	logging traps {start system config temp resource fan
	power service_port user_port auth_failure
	bridge_stat switch_fabric redundant_cpu
	unknown_mac snmp login_status}
To Disable:	no logging traps {start system config temp resource
	fan power service_port user_port auth_failure
	bridge_stat switch_fabric redundant_cpu
	unknown_mac snmp login_status}

Table 16-6. Parameters, Keywords, Arguments

Name	Definition
start	Logs starts of the system.
system	Logs system events.
config	Logs each configuration change (for example,
	enabling and disabling ports).
temp	Logs changes in temperature status. Temperature
	status messages could precede a switch shutdown,
	and are often critical.
resource	Logs changes in system resources.
fan	Logs fan status changes. Fan failures will
	eventually lead to overheating the system. The fan
	status message provides a good early warning for a
	failure that could eventually cause the switch to
	shut down.
power	Logs the addition or removal of a power supply
	1 of 2

Document No. 10-300090, Issue 1 16-13