80-Series QoS

 

 

 

 

 

set port police

 

 

Command Mode

Global Configuration.

 

Description

Enables or disables policing for ingress traffic on a port.

 

Syntax

 

 

 

 

 

 

 

 

To Configure:

set port police {{<mod-num> <mod-swport-range>}

 

 

 

[..., {<mod-num> <mod-swport-range>}] all-ports}

 

 

 

queue <queue> {bit-rate <rate> normal-burst

 

 

 

<normal-burst>}

 

 

 

 

 

 

To Disable:

set port police {{<mod-num> <mod-swport-range>}

 

 

 

[..., {<mod-num> <mod-swport-range>}] all-ports}

 

 

 

queue <queue> disable

 

 

 

 

 

Table 23-12. Parameters, Keywords, Arguments

Name

Definition

 

 

<mod-num>

The slot number of a module. If you specify <mod-

 

num>, policing is enabled for all ports on the module

 

in the slot that you specify.

 

 

<mod-swport-range>

The slot number of a module, and, either a port

 

number, or a range of port numbers having the format

 

Px-Py. For example:

 

•

To specify port 1 on the module in slot 3, enter

 

 

3/1.

 

•

To specify ports 1 through 5 on the module in

 

 

slot 3, enter 3/1-5.

 

If you specify <mod-swport-range>, policing is

 

enabled for the port or range of ports on the module in

 

the slot that you specify.

 

 

all-ports

All ports in the chassis. If you specify all-ports,

 

policing is enabled on all modules in the chassis.

 

 

<queue>

The queue number, which can range from 0 to 7.

 

 

 

 

 

1 of 2

 

 

 

Document No. 10-300090, Issue 1

23-23

Page 511
Image 511
Avaya 106760804 manual Set port police, To Configure