Chapter 5 Various Ways to Scan

7 Select an application to be launched by the [Send to] or [Scan] button event and an operation to be performed.

Click [Start this program] under [Actions], and select an application from the menu shown on the right.

8 Click the [OK] button.

For more details about ScandAll PRO, refer to "How to Use ScandAll PRO".

If you are using an application other than ScandAll PRO, the setup of the computer is completed here. Proceed to configure the scanner settings.

zThe windows that appear and the operations differ by the operating system that you are using.

zTo configure multiple buttons, repeat steps 5 to 8.

zTo enable this setting in Windows 2000, click [OK] or [Apply] for each button and restart the computer.

Scanner settings

Menu

Function

 

 

/Enter

 

Send to Check

Clear

[Send to/Pause] Button

Stop

/Back

/Pause

 

Scan

[Scan] Button

Counter

iMFF Reset Eject

z[Scan] button

No particular setting is required.

D The specified application starts when the [Scan] button is pressed.

z[Send to/Pause] button

In the [Main Menu] of the operator panel, change the setting number for the [Send to/Pause] button which is displayed on the LCD.

Match the number with the scanner button event configured in the computer ([Send to 01] to [Send to 50]).

For instance, display "F02" in the LCD's indicator to execute an event configured for [Send to 02].

D The specified application starts when the [Send to/Pause] button is pressed.

zFor more details about the operator panel, refer to "Chapter 4 How to Use the Operator Panel" (page 60).

zFor information on how to change the setting number for [Send to/Pause] button, refer to "4.3 Function Selection" (page 81).

111