Chapter 2 How to Load Documents

How to Load Documents

There are two ways to load the documents.

Setting the documents at the center of the hopper

This style is used mainly when the documents are of the same size.

Setting the documents by the left or right side of the hopper

This style is used mainly when the documents are in different sizes or when you want to shift the center of the documents.

Note that different conditions apply for multifeed detection when you set the documents by either left or right side of the hopper.

■Setting the documents at the center of the hopper

1 Load documents on the hopper.

Set the documents with the front side (scanning side) facing up.

zMake sure to keep the documents within the maximum load line on the inside of the hopper side guides.

zPull out the hopper extension according to the length of the document before placing the documents.

35