Chapter 5 Various Ways to Scan

4 Select [Auto Color Detection] for [Output mode].

5 Under [Select Current Image Setting], select the side(s) to scan.

Configure the scan settings in the [TWAIN Driver (32)] dialog box.

You need to pre-configure settings for [Color/Grayscale] detection as well as those for [Binary] detection.

When the document is recognized as a color/grayscale document, it is output in the mode selected under [Image Mode] in the [TWAIN Driver (32)] dialog box.

6 Click the [OK] button in the [TWAIN Driver (32)] dialog box.

DThe settings are saved.

7 Perform a scan from ScandAll PRO.

For information on how to perform scanning, refer to "How to Use ScandAll PRO".

You can use a batch profile to change settings such as the folders to save respective scanned color/grayscale and black & white images, and their file formats and names.

The procedure is as follows:

1In the [Profile Editor] dialog box, select the [File format and Name scheme] tab, and then select the [Sort color and monochrome automatically] check box.

2Specify the respective folder names to save, the file formats, and the file names for the color/ grayscale and black & white images.

3Click the [OK] button.

DThe settings are saved.

4Perform a batch scan.

For information on how to perform batch scanning, refer to "How to Use ScandAll PRO".

108