Chapter 8 Troubleshooting

 

 

 

 

4 Close the ADF/top cover.

 

z When a document is jammed in the paper path, be

 

careful not to damage the document if you are pulling

 

For information on how to close the ADF, refer to "1.5 Opening/

 

 

Closing the ADF" (page 20).

 

it out from the ADF side which is against the feeding

 

 

 

 

 

direction. Especially for documents that are not flat

 

For information on how to close the top cover, refer to "1.6 Opening/

 

(e.g. with holes, tapes), they can be removed more

 

Closing the Top Cover" (page 22).

 

smoothly from the top cover side.

 

 

 

z Make sure to check the documents and the paper path

 

z Confirm that the ADF is closed properly. You may not

 

thoroughly and remove all staples and paper clips as

 

be able to perform scanning if the ADF is not closed

 

they cause paper jams.

 

properly.

 

z Be careful not to damage the glass surface and the

 

z Occasionally when scanning is completed or

 

guides when removing documents with staples or

 

canceled, documents may remain in the ADF without

 

paper clips.

 

any error message displayed. In such cases, remove

 

z Be careful not to have the document caught in the

 

the documents by following the above steps 1 to 4.

 

small gap as shown in the picture below, because

 

 

 

 

 

 

there is little space in the paper path.

 

 

 

 

 

gap

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

141