Chapter 1 Scanner Overview

How to Fix the Stacker Height

Highly deformed (curled, folded or creased) documents may be scattered in the output when they are ejected onto the stacker. In that case, having the stacker height fixed during scanning may help the documents be stacked neatly.

1 If the scanner driver’s setup dialog box is displayed, close the dialog box.

2 In the [Main Menu] of the operator panel, select [2: Fixed] for [9: Stacker Positioning].

For details about the settings, refer to "4.2 Main Menu" (page 65).

DThe stacker height is fixed.

zWhen the scanner has just been powered on, it is set to [1: Movable].

zIn the rear ends of the stacker, a sensor is mounted on each side which detects documents. Make sure that nothing is placed in a location (between the two sensors) that may block the sensor.

Sensor

Sensor

zThe stacker may move just after turning the power on or when the scanning starts. Do not touch or place anything on top.

25