Chapter 9 Operational Settings
Item | Description | Setting/Value | Factory Default | SCSI or USB | SCSI or USB |
|
|
|
| Connector 1 | Connector 2 |
|
|
|
|
|
|
|
|
|
| 3: Configurable | |
|
|
|
| ||
|
|
|
|
|
|
Paper Protection | You can specify the level of | Low / Normal / High | Normal | 3 | 3 |
Sensitivity | sensitivity to detect an abnormal |
|
|
|
|
| feeding of documents when Paper |
|
|
|
|
| Protection is enabled. |
|
|
|
|
| It can also be configured from the |
|
|
|
|
| operator panel. Note that you can |
|
|
|
|
| prioritize the operator panel setting. |
|
|
|
|
|
|
|
|
|
|
Scan Setting for | For documents with index tabs or | SCSI or USB Connector 1: | Document | 3 | 3 |
Document with Tab | index stickers attached on the | Document with tab / Document without | without tab |
|
|
(Automatic Page | bottom of the page, you can keep | tab / |
|
|
|
Size Detection) | the tab (index or index stickers) on | SCSI or USB Connector 2: |
|
|
|
| the scanned image when scanning |
|
|
| |
| in Automatic Page Size Detection. | Document with tab / Document without |
|
|
|
| Specifying [Document with tab] | tab |
|
|
|
| shows the image of the tab, but |
|
|
|
|
| slows down the scanning speed. |
|
|
|
|
|
|
|
|
|
|
Scan Setting for | Configure this setting when the | Enable / Disable | Disable | - | 3 |
Document in Dark | edges of a document with dark | Density of background color: Level 1 to 5 |
|
|
|
Background Color | background color are falsely |
|
|
|
|
| detected. You can specify the level |
|
|
|
|
| of sensitivity to accurately detect the |
|
|
|
|
| edges of documents with dark |
|
|
|
|
| backgrounds. |
|
|
|
|
|
|
|
|
|
|
Overcrop/ | Adjust the size of the scanned | Overcrop: 0 to 5 mm | 0 mm | - | 3 |
Undercrop | document output image detected in | (in increments of 1 mm) |
|
|
|
| Automatic Page Size Detection. | Undercrop: |
|
|
|
|
| (in increments of 1 mm) |
|
|
|
|
|
|
|
|
|
180