Chapter 9 Operational Settings
Setting for a Function to Save the Documents | 3 Specify whether to enable or disable Paper Protection. | ||||
from Being Damaged [Paper Protection] |
| When you select [Enable], the scanner stops the scan when it detects | |||
|
| a document that is unusually warped. | |||
Specify whether to enable or disable Paper Protection. | |||||
|
|
|
| ||
Feeding errors during scanning could damage or tear valuable |
|
|
| z Note that Paper Protection is a function that | |
documents. Enabling this setting reduces the risk of having |
|
|
| suppresses the documents from being damaged, and | |
|
|
| does not guarantee all documents to be saved. | ||
your documents damaged in such ways, by stopping the scan |
|
|
| ||
|
|
| z When you enable Paper Protection, make sure to set | ||
when the scanner detects a document that is unusually |
|
|
| the documents with their top edges aligned (especially | |
warped. |
|
|
| for a mixed batch with different lengths). | |
|
|
| If the top edges are not aligned properly, the Paper | ||
This function can be used to scan documents such as thin |
|
|
| ||
|
|
| Protection function may be activated and stop the | ||
papers which are difficult to feed. |
|
|
| scan even when the documents are being fed | |
1 Start up the Software Operation Panel. |
|
|
| correctly. | |
|
|
|
| ||
|
|
|
| ||
|
|
| z Paper Protection is disabled in Manual Feed mode. | ||
Refer to "9.1 Starting Up the Software Operation Panel" (page 170). |
|
|
| ||
2 From the listing on the left, select [Device Setting 2] J |
|
|
| z This setting can also be configured from the scanner | |
|
|
| driver’s setup dialog box or the operator panel. Note | ||
|
|
| |||
|
|
| that priority is given to the scanner driver setting | ||
[Paper Protection]. |
|
|
| ||
|
|
| unless you have prioritized the operator panel setting. | ||
|
|
|
| ||
|
|
|
|
|
201