When the [Show multifeed image] check box is selected, it displays a dialog box where you can check the image(s) that multifeed was detected on.
zScanned image(front side), scanned image(back side) Shows the multifeed image(s).
z[OK] button
Keeps the image and continues scanning. To have the multifeed pattern memorized, you need to select the
You can change whether or not to detect multifeed by pressing the [iMFF] button on the operator panel. When you use the operator panel, priority is given to the multifeed pattern memory setting of the operator panel.
z[Rescan] button
Continues scanning after setting the documents on the hopper again.
z[Cancel] button
Discards the multifeed image and stops the scan. Note that images up until the detection of multifeed are kept.
5 Click the [OK] button.
DIt returns to the [TWAIN Driver (32)] dialog box.
6 Click the [OK] button in the [TWAIN Driver (32)] dialog box.
DThe settings are saved.
7 Perform a scan from ScandAll PRO.
For information on how to perform scanning, refer to "How to Use ScandAll PRO".
113