Chapter 4 How to Use the Operator Panel
Item | Description |
| Setting/Value | Factory Default |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
Information | [Information] appears as an item in [Main Menu] only when | is | Message for replacing consumables / | Only displayed |
| cleaning / replacing maintenance parts / | when there is | ||
| displayed on the LCD. |
| ||
|
| regular maintenance | information | |
|
|
|
|
|
*1: Although there is no factory default setting, it is set to [1: Movable] when you turn on the power. Therefore, the setting does not change even when you initialize the operator panel.
*2: Although there is no factory default setting, it is set to [4: Lower] when you turn on the power. Therefore, the setting does not change even when you initialize the operator panel.
*3: Although there is no factory default setting, the settings are configured as follows when you turn on the power: [2: Multiple sheets] for [No. of sheets scanned], [1: Front Side] for [Print], [1: (L)ABCDEFGHIJKLMNOPQRSTUVWXYZ[]^_’00000000] for [Print Pattern], and [1: Yes] for [Test Print]. Therefore, the settings do not change even when you initialize the operator panel.
*4: [Print: 1: Front Side / 2: Back Side] does not appear unless both
*5: Although there is no factory default setting, it is set to [2: No] when you turn on the power. Therefore, the setting does not change when you initialize the operator panel.
80