Chapter 9 Operational Settings
Specifying the Sensitivity Level for Paper | 3 Specify the sensitivity level for Paper Protection. | |||
Protection [Paper Protection Sensitivity] |
| Low: | Decreases the sensitivity level to detect warped | |
You can specify the level of sensitivity to detect an abnormal |
|
|
| documents. |
| Normal: Monitors the documents in normal sensitivity. Keep this | |||
feeding of documents when Paper Protection is enabled. |
| |||
|
|
| setting for normal use. | |
Documents are deformed (e.g. warped, bent, creased) when |
|
|
| |
| High: | Increases the sensitivity level to detect warped | ||
they are not being fed by the rollers properly. To detect such a |
| |||
|
|
| documents. | |
symptom and stop the scan, select [1: Low] to only detect |
|
|
| |
|
|
|
| |
documents that are highly deformed, and [3: High] to also |
|
|
|
|
|
|
| z If a paper jam occurs at feeding position frequently, | |
detect documents that are slightly deformed. |
|
|
| select [Low]. |
1 Start up the Software Operation Panel. |
|
|
| z This setting can also be configured from the operator |
|
|
| ||
|
|
| panel. Note that you can prioritize the operator panel | |
|
|
| setting. | |
Refer to "9.1 Starting Up the Software Operation Panel" (page 170). |
|
|
|
|
2 From the listing on the left, select [Device Setting 2] J |
|
|
|
|
[Paper Protection Sensitivity]. |
|
|
|
|
202