Chapter 5 Various Ways to Scan
You can check and adjust the scanned image in the [Image Adjustment] dialog box.
1 Load a document on the hopper.
For information on how to load documents, refer to "Chapter 2 How to Load Documents" (page 33).
2 Start up ScandAll PRO, and select [Preferences] in the [Tool] menu.
DThe [Setup] dialog box appears.
3 Select [TWAIN] for [Device Driver] in the [Scan] tab. 4 Click the [OK] button.
5 In the [Scan] menu, select [Scan Settings].
DThe [Scan Settings] dialog box appears.
6 Select the [Show TWAIN dialog before each batch scan process] check box.
7 Click the [Scan] button.
DThe [TWAIN Driver (32)] dialog box appears.
8 Select the [Prescan] check box.
10 Check the scanned image and change the parameters in [Adjustment Items] if necessary.
11 Click the [Continue] button.
DScanning is continued according to the adjusted setting.
9 Click the [Scan] button.
DThe scanned image appears in the [Image Adjustment] dialog box.
109