Chapter 9 Operational Settings
Configure this setting to change the number of feeding retries upon pick errors.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 170).
2 From the listing on the left, select [Device Setting 2] J [Number of paper feeding retries].
Specifying the Interval to Feed the Documents [Set the interval for feeding sheets]
If the scanned image is partially missing at the bottom due to a large skew when scanning in Automatic Page Size Detection, specify a longer interval to feed the documents to leave more time between each document to be scanned.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 170).
2 From the listing on the left, select [Device Setting 2] J [Set the interval for feeding sheets].
3 Specify the number of paper feeding retries.
You can select from1 to 12 times.
This setting can also be configured from the operator panel.
3 Specify the paper feeding interval.
You can select from [Short (Default)] to [Long] (in four levels).
Note that it takes more time for scanning as the paper feeding interval becomes longer.
194