Chapter 1 Scanner Overview
1.2 Parts and Functions
This section shows the names of the scanner parts.
FrontStacker
Stacks up the ejected documents. It can be kept at an optimum height to straighten the documents.
Stacker Side Guide
Aligns the documents in width direction as they are ejected onto the stacker.
Stacker Extension
Pull out and adjust to the length of the documents.
Paper Stop
Guides the ejected documents in length direction to prevent them from being scattered. Though documents can be aligned without the paper stop, use it to stack them more neatly.
Hopper Side Guide
Guides the documents in width direction as they are fed into the scanner.
Hopper Extension
Pull out to place long documents on the hopper.
Hopper
A table for loading documents to scan.
| Paper Output |
| Ejects the scanned documents. |
| Top Cover |
| A cover for the upper paper path. |
| Open it to remove jammed |
| documents or clean the inside of the |
| scanner. |
| Top Cover Release Tab |
| Lift up to open the top cover. |
| Operator Panel |
| Consists of LCD, buttons and LED. |
| It can be used to operate the |
| scanner or check its status. |
| For details about the operator panel, |
| refer to "Chapter 4 How to Use the |
| |
| Power Button |
| Press to turn the power ON/OFF. |
| ADF Release Tab |
ADF (Automatic Document | Lift up to open the ADF. |
Feeder) |
|
Pulls and feeds the documents loaded on |
|
the hopper one at a time. |
|
Open it to replace the consumables or |
|
14