Chapter 5 Various Ways to Scan
5 Insert the document until the top edge touches the rollers | 6 Repeat step 5 until all the documents are scanned. |
on the inside. |
|
When more than one sheet is loaded, only insert the document on the | z Scanning can be stopped immediately by pressing the |
top of the stack. | [Counter Reset] button on the operator panel. |
| z Scanning stops when no document is loaded on the |
| hopper after the time specified in the Software |
| Operation Panel. |
| z The scanner waits for the period of manual feed |
Roller | timeout even when there is no document left on the |
| hopper. |
| z The timeout period for manual feeding can be |
| configured on the operator panel or in the Software |
| Operation Panel. |
| z Continuous Feed mode can be cleared in [10: Hopper |
| Level] of the [Main Menu] on the operator panel. The |
| hopper is set to [4: Lower] when you clear manual |
| feeding (continuous). For more details about the |
D The document is picked, scanned, then ejected onto the stacker. | settings, refer to "4.2 Main Menu" (page 65). |
After the scan, the scanner waits for the next sheet to be fed for |
|
the time specified in the Software Operation Panel. |
|
In [Continuous Feed] mode, the scanner separates the documents and only scans one sheet at a time even when multiple sheets are accidentally fed.
96