Chapter 9 Operational Settings
9.5 Settings Related to Multifeed Detection
Specifying a multifeed detection method | 2 From the listing on the left, click [Device Setting 2] J |
[Multifeed] | [Multifeed]. |
Multifeed is an error when two or more sheets are fed through |
|
the ADF at once. It is also called a “multifeed” when a different |
|
document length is detected. |
|
Not noticing multifeed errors while scanning may put you in a |
|
situation where important data are missing from the scanned |
|
images. Multifeed detection function is equipped to prevent |
|
such troubles. |
|
When this function is enabled, an error message is displayed |
|
as soon as it detects a multifeed, and stops the scan. |
|
Note that multifeeds cannot be detected in the area of 15 mm |
|
from the leading edge of the document. |
|
1 Start up the Software Operation Panel. |
|
Refer to "9.1 Starting Up the Software Operation Panel" (page 170). |
|
207