Chapter 2 How to Load Documents
Restricting the Background Color AreaThe scanning area from the leading edge to the first 3 mm should be in white (ground color of the document).
If [White Level Follower] is enabled, the following area (shaded in light blue) must be the same as the ground color or the color to be dropped out.
If the document contains text, frames or signatures in this area, disable [White Level Follower].
The following is a typical form of a Job Separation Sheet.
Reference point |
|
| 15 |
| Leading edge | ||||
| |||||||||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 20 |
|
|
direction |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
direction |
|
| |
Feeding | Scanned side |
|
(Unit: mm)
For details about [White Level Follower], refer to the FUJITSU TWAIN 32 Scanner Driver Help.
| Bottom edge |
| |
Center of document | (Unit : mm) |
The document must be wider than A4/Letter size (210 mm/ 8.27 in.).
The above condition applies when the document is set to the center of the pick roller width.
45