Chapter 6 Daily Care

zPaper path lower-side (glasses: 2 sheets)

Glass (removable)

Glass (not removable)

The glass should not have to be removed as it is designed to block paper dust. Remove and clean the glass only if the scanner is being used in an environment with large amounts of paper dust and vertical streaks appear on the scanned image even after cleaning the glass. Be careful not to let any paper dust in when removing the glass. Clean the glass on paper path lower-side as follows:

5From the gap where the glass was attached, clean the other layer of glass inside, using a cotton swab or something alike.

Cross-section

Glass

Vertical streaks may appear on the scanned image when the glass is dirty.

1Loosen the screw until the glass can be lifted.

2Tilt the glass to the angle as shown above.

3Remove the glass as you slide it to the left.

4Clean the removed glass.

127