Chapter 7 Replacing Consumables
7.1 Consumables and Replacement Cycles
The following table shows the consumables used for the scanner.
Name | Part No. | Suggested replacement |
|
| cycle |
|
| |
PICK ROLLER |
SEPARATOR ROLLER PA03575- | 600,000 sheets or one year |
K012 |
|
BRAKE ROLLER | PA03575- | 600,000 sheets or one year |
| K013 |
|
Consumables must be replaced periodically. It is recommended that you keep a stock of new consumables and replace them before it reaches the end of the consumable life. The scanner records the number of sheets scanned after replacing the consumables (for pick roller, separator roller, brake roller), which allows you to check the status on each consumable.
To check the status on the usage of the consumables, refer to "9.3 Settings Related to Page Counters" (page 182).
Note that the suggested replacement cycles are guidelines for
using A4 (80 g/m2 [20 lb])
Only use the specified consumables.
To purchase the consumables, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
Please note that some parts (other than the consumables) need to be replaced by a service engineer, depending on the type of documents scanned and how often the scanner is used. For instance, Maintenance Parts (e.g. assist roller) need to be replaced by a service engineer. For more information, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
131