Chapter 5 Various Ways to Scan

Operational procedure

 

 

*1: When the paper separation force is set to [„„„„„] which is the

1 After a multifeed error occurs, either press the [Eject]

 

 

maximum level, the part of the message “When [Ready] is displayed,

 

 

increase the paper separation force by using the [U] button to suppress

 

 

multifeeds.” does not appear.

 

button to eject the document from the paper path, or open

 

 

 

the ADF to remove the document.

 

 

2 Place the removed document back on the hopper.

 

When the document is removed, the display on the operator panel

 

 

LCD changes as follows:

 

 

 

If a multifeed error is detected while no paper is attached on the

 

 

 

 

 

document, press the [Scan] button or restart scanning via the

 

Upon multifeed

Upon ejecting

 

 

 

computer (do not press the [iMFF] button). If there is a paper

 

 

document

 

 

 

 

 

 

attachment on the ejected sheet and the attachment is likely to be the

 

Multifeed detected (Overlap)

[Ready

 

 

cause of the multifeed error, then proceed to the next step.

 

Press the iMFF button to eject the document and

(Multifeed)]

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to suppress multifeed detection from next scans.

screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LCD

 

Press the Eject button just to eject the document.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When [Ready] is displayed, increase the paper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

separation force by using the [U] button to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

suppress multifeeds. (*1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multifeed detected (Overlap)

 

 

 

 

 

Menu

 

 

 

 

/Enter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Function

 

 

 

 

 

Press the Eject button to eject the document.

 

 

 

 

 

Send to

Check

Clear

 

 

 

 

 

When [Ready] is displayed, increase the paper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

/Pause

 

 

 

 

/Back

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

separation force by using the [U] button to

 

 

 

 

 

 

 

Stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

suppress multifeeds. (*1)

 

 

 

 

 

 

 

Scan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multifeed detected (Overlap)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Scan] Button

 

Press the iMFF button to memorize the multifeed

 

 

 

 

 

 

 

Counter

 

 

 

 

 

 

 

 

 

pattern and eject the document. Press the Eject

 

 

 

 

 

iMFF

Eject

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

[Eject] Button

 

 

 

 

 

 

 

 

 

 

 

button to eject the document.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[iMFF] Button

 

When [Ready] is displayed, increase the paper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

separation force by using the [U] button to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

suppress multifeeds. (*1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you click the [OK] button in the window that shows the

 

 

 

 

 

 

 

 

 

Multifeed detected (Overlap)

 

 

 

 

 

 

multifeed image, step 2 is not required because the scanner

 

Press the iMFF button to memorize the multifeed

 

 

 

 

 

 

feeds the multifeed image and continues the scan.

 

 

 

 

 

 

 

pattern. Press the Eject button to eject the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

document.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When [Ready] is displayed, increase the paper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

separation force by using the [U] button to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

suppress multifeeds. (*1)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multifeed detected (Length)

[Ready] screen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the Eject button to eject the document.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

116