Chapter 6 Daily Care
| Scan Glass | 4 | Clean the removed glass. | |
Clean it lightly. | |||
5 | From the gap where the glass was attached, clean | ||
z Paper path | |||
| the other layer of glass inside, using a cotton swab | ||
Glass (removable) |
| ||
| or something alike. | ||
|
| Glass | |
|
|
Glass (not removable) |
|
|
The glass should not have to be removed as it is |
| |
designed to block paper dust. Remove and clean the |
| |
glass only if the scanner is being used in an environment |
| |
with large amounts of paper dust and vertical streaks |
| |
appear on the scanned image even after cleaning the | Vertical streaks may appear on the scanned image when | |
glass. Be careful not to let any paper dust in when | the glass is dirty. | |
removing the glass. Clean the glass on paper path upper- |
| |
side as follows: |
|
|
1 |
|
|
2 | 3 |
|
|
| |
1Loosen the screw until the glass can be lifted.
2Tilt the glass to the angle as shown above.
3Remove the glass as you slide it to the right.
126