Chapter 6 Daily Care
8 Press the [Scan] button.
DThe Cleaning Sheet is fed through and ejected onto the stacker.
9 Place the same Cleaning Sheet on the
17 Reset the cleaning counter.
Reset the counter by one of the following methods.
zSelect [23: Show/Clear Counters] from the [Main Menu] on the operator panel, then reset the counter.
For more details, refer to "4.2 Main Menu" (page 65).
zStart up the Software Operation Panel and reset the counter. For more details, refer to "Resetting the counters" (page 183).
Adhesive side
10 Press the [Scan] button.
DThe Cleaning Sheet is fed through and ejected onto the stacker.
11
12 Place the Cleaning Sheet on the
13 Press the [Scan] button.
DThe Cleaning Sheet is fed through and ejected onto the stacker.
14 Place the same Cleaning Sheet on the
15 Press the [Scan] button.
DThe Cleaning Sheet is fed through and ejected onto the stacker.
16 Press the [Stop] button.
DCleaning is completed.
122