Chapter 7 Replacing Consumables
7.2 Replacing the Pick Roller
|
|
| 2 Pull the pick roller off the rotating shaft as you grab the tab on the |
|
|
| pick roller (×2). |
|
| There are two pick rollers. Make sure to replace both two units. | |
|
|
| |
|
|
|
|
|
|
|
|
1 Remove all documents from the stacker.
2 Open the ADF.
For information on how to open the ADF, refer to "1.5 Opening/
Be careful not to have your fingers caught | Pick Roller |
when the ADF closes. |
|
3 Remove the pick rollers (×2) from the scanner. | 4 Install a new set of pick rollers (×2) in the scanner. |
1 Place the pick rollers (×2) on the shaft. |
1 Open the roller cover. Grab the tabs on the left and right side with your fingers and pull down the cover towards you.
Tab | Roller Cover | 2 Close the roller cover. Make sure that both ends of the cover are |
|
| locked firmly. |
132