Chapter 4 How to Use the Operator Panel

4.3 Function Selection

This section explains about the Function Selection.

When you press the [Function/Enter] button in the [Ready] screen, [Function Selection] is displayed.

By using Function Selection, you can configure an application to be launched when the [Send to/Pause] button is pressed.

How to Use Function Selection

d[Function/Enter] Button

Menu

 

Function

 

 

/Enter

Send to

Check

Clear

/Pause

 

/Back

 

Stop

e[U] / [V] Button

 

 

 

 

[Function/Enter] Button

1 Press the power button on the front of the scanner.

D[Ready] is displayed on the LCD. The indicator displays [F01] when the power has just been turned on.

2 Press the [Function/Enter] button.

D[Function Selection] is displayed on the LCD.

3 Press the [U] or [V] button and select a parameter, then press the [Function/Enter] button to confirm.

For more details about the setting parameters, refer to "Item Configurable in Function Selection" (page 82).

DThe setup is completed when the LCD displays the [Ready] screen.

The configured parameter is shown by the indicator. In this example, the indicator displays "F02".

Note that No.C indicates that the setting is fixed at the Software Operation Panel. If No.C is selected, the indicator displays "SOP".

81