Glossary

U

Ultrasonic sensor

A sensor that detects multifeed errors by ultrasonic wave. It detects multifeeds by monitoring the difference in the amount of ultrasonic waves transmitted through the documents.

Undercrop

Refers to cropping the scanned image in a size small than the document in Automatic Page Size Detection. Undercrop is used to remove excess data (borders) around the image which is generated in the process of cropping.

USB

USB (Universal Serial Bus) is a standard for interfaces used to connect devices such as keyboards and scanners. Up to 127 devices can be connected by this interface. USB devices can be connected/disconnected without powering off the devices. For USB 2.0, the data transfer rate is; 1.5 Mbps in Low-Speed, 12 Mbps in Full-Speed, and a maximum of 480 Mbps in Hi- Speed mode.

For USB 1.1, the data transfer rate is; 1.5 Mbps in Low-Speed, and a maximum of 12 Mbps in Full-Speed mode.

W

White Level Follower

A function to correct the difference between white colors in unbleached paper (e.g. wood containing paper) and in scanned images.

White Reference Stripe

The white part located in the ADF that defines the lightest area in an image, causing all other areas to be adjusted accordingly.

Z

Zone OCR

A function which performs text recognition on the specified area of the scanned image.

TOP

Contents

Index

Introduction

Scanner

Overview

How to Load Documents

Configuring the Scan Settings

How to Use the Operator Panel

Various Ways to Scan

Daily Care

Replacing Consumables

Troubleshooting

Operational Settings

Appendix

Glossary

239