Chapter 9 Operational Settings
| Eliminating Shadows or Streaks on the Scanned | 3 Specify the width of each margin to fill: top, bottom, right, |
| Image Edge [Page Edge Filler (ADF)] | and left. |
Depending on the condition of the document that you scan, some shadow of the document may be reflected onto the edge of the output image and appear as black streaks.
In this case, you can improve the image quality around the edges by using the Page Edge Filler function to fill around the edges.
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 170).
2 From the listing on the left, select [Device Setting 2] J [Page Edge Filler (ADF)].
|
|
|
|
|
|
|
| T :Top = 0 to 15 mm |
|
|
|
| T |
|
|
| |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| B :Bottom= |
|
|
| Image |
|
|
| R :Right = 0 to 15 mm | |
| L | R L :Left = 0 to 15 mm | ||||||
| area | |||||||
|
|
|
|
|
| (in 1 mm increments) | ||
|
|
|
|
|
|
|
| |
B
The specified area is filled in the same color as the background.
Note that if the target range of the Page Edge Filler is too wide, some characters near the edge may be cut out.
zThe background is normally white but it can be changed to "Black background" in the scanner driver. If you are using the FUJITSU TWAIN 32 scanner driver, select the [Option] button, and then specify [Black background] for [Automatic Size and Skew detection] in the [Rotation] tab.
zThis setting can also be configured from the scanner driver’s setup dialog box. Note that priority is given to the setting with the larger value.
zThis setting does NOT appear when Kofax VRS is used.
188