Chapter 9 Operational Settings
Settings for Multifeed Detection in Manual Feeding[Multifeed detection when scanning in manual feeding mode]
Configure this setting when you want to enable multifeed detection for scanning in Manual Feed mode.
1 Start up the Software Operation Panel.
3 Select a detection method.
Detection | Description |
|
|
Disable | Does not detect multifeeds. |
|
|
Follow driver | Detects multifeeds if multifeed detection is |
settings | enabled in the scanner driver settings. |
| (Displays [Follow multifeed settings] when |
| connected via SCSI or USB Connector 2.) |
|
|
Refer to "9.1 Starting Up the Software Operation Panel" (page 170).
2 From the listing on the left, select [Device Setting 2] J [Multifeed detection when scanning in manual feeding mode].
209