Chapter 9 Operational Settings
Specify [Optimize] when you use overscan and the image is partially missing due to a large skew.
When an abnormal image skew is detected, you can ensure that the whole image is contained by setting a sufficient amount of black margin on the top and the bottom.
Select [Thick] to increase the amount of black margin.
Missing | Added margin | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Added margin
When parts of the image | When [Optimize] is |
are missing | specified |
1 Start up the Software Operation Panel.
Refer to "9.1 Starting Up the Software Operation Panel" (page 170).
2 From the listing on the left, click [Device Setting 2] J [Overscan Control], then select [Optimize].
3 Specify the amount of [Black frame thickness] for the top and bottom.
zThis option is recommended to be used with [Set the interval for feeding sheets].
zIt is recommended that you scan in the largest available paper size.
zThis setting does NOT appear when Kofax VRS is used.
206