Chapter 1 Scanner Overview
1.4 Opening/Closing the Hopper
This section describes how to open and close the hopper. | How to Close the Hopper | ||
How to Open the Hopper | Close the hopper in the following procedure: | ||
| |||
Open the hopper in the following procedure: | 1 | Remove all documents from the hopper. | |
1 Push the upper middle section of the hopper. | |||
2 | Slide in the hopper extension. |
|
| Hopper Extension |
2 Bring down the hopper as you support it with your hand. | 3 | If the hopper level has been adjusted, set the hopper back |
|
| to the lower position. |
|
| Lower the hopper level from the operator panel on the scanner. |
|
| For details on how to adjust the hopper level, refer to "1.7 Setting the |
|
| |
| 4 | Close the hopper. |
|
| Make sure to push the hopper until it locks. |
3 Adjust the hopper extension to the length of the document.
19