Chapter 9 Operational Settings
Specifying the Cycle to Replace Consumables | 3 Specify a value for the life cycle for replacing each | |||
[Life Counter Alarm Setting] | consumable (Pick roller, separator roller and brake roller). | |||
|
|
| The specifiable value is from 10,000 to 2,550,000 in increments of | |
You can specify the replacement cycle of the consumables. | ||||
10,000. | ||||
The background color of the counter changes to light yellow |
| |||
when the page count after replacing the consumable reaches |
| |||
95% of the value specified here, and turns yellow when it |
| |||
reaches 100%. You can also display the message for |
| |||
replacing consumables (page 184). |
| |||
1 Start up the Software Operation Panel. |
| |||
Refer to "9.1 Starting Up the Software Operation Panel" (page 170). |
| |||
2 From the listing on the left, select [Device Setting 2] J |
| |||
[Life Counter Alarm Setting]. |
| |||
|
|
|
|
185